Stator Winding Coil Tester_HMI_CH-TMM3000AC
Production information
Product Introduction
This tester is human machine interface (HMI) and applicable for motor stator and Coil test (1Φ3L, 1Φ6L, 3Φ3L, 3Φ6L). Test accurate and easy to operate, save test time, improve product quality. Our product customize available
Major Measurements
- DC resistance test : default range 2.000Ω/20.00Ω/200.0Ω 3 section
- Layer short ( Impulse ) test : default voltage in 0.1-3kV
- AC Hi-Pot (puncture) test : default voltage 0.1~3kV, and leakage current setting 5 sets (0.5/1/2/5/10mA)
- Insulation resistance test : default DC voltage 500 VDC, and insulation resistance 0.1-100M Ω (Ohm)
- Current test :Test voltage 2Φ/3Φ 5V~100V in AC and 20A(Max.).
- Rotation direction test : identify rotation direction
Major Components
- DC resistance tester
- Layer short ( Impulse ) tester
- AC Hi-Pot (puncture) and Insulation resistance tester
- Current and rotation direction tester
- PLC Control unit and human machine interface (HMI)
- High voltage switching circuit
- Stator ( Coil ) holder A, B
- Equipment box
Product Features
- Real-time interval record computer.
- Multi-wires resistance measurements and 20 degree c temperature calibration.
- Withstanding voltage( Hipot ) and Insulation resistance test.
- Layer short test ( impluse test )
- Layer waveform measurement
- Operating current and rotation direction identify
- 200 sets benchmarking (HMI can store benchmark, but can not store test data).
- HMI screen display test results
- Customized products
Warranty
All of our equipment carry a one-year warranty which will enable from the date of acceptance. Within the warranty period, we would supply free repair service for any defective and malfunctioning parts emerges from normal operating conditions. If equipment has any problem, please contact us. We would have the discussion and judgment about the problem with you. After that, we would email the repair instruction manual to your company. If the problem could not be solved under the instructions, please send the defective parts to us, then we would send it back after the repairmen. The warranty does not cover damage caused by the following conditions and the repairmen is not for free.
- Damage caused by any majeure factors.
- Breakdown or damage caused by misuse, abuse and neglect; if the operations beyond the specified ranges of the contract; the malfunctioning factors shall be judged by both sides.
- Normal wear and tear of consumable parts.
- Damage caused by the parts supplied by customer, as stipulated on contracts.
- The factor which is not caused by our company.
Product references
Outer appearance
Print out test result sample