I AND I International Co. Ltd
EN
/
TW
  • NEWS
  • ABOUT US
  • PRODUCTS
  • PARTNER
  • CONTACT US
QUERYCAR DOWNLOAD FAQ
  • Home
  • PRODUCTS
  • Machinery Coolant Pump

PRODUCTS

  • Machinery Coolant Pump
  • Multistage Coolant Pump
  • Variable Voltage Transformer
  • Vibration Motor
  • Trochoid Oil Pump
  • Motor & Coil Fab Equipment
  • Mist Smoke Fume Collector
  • Portable Evaporative Air Cooler
  • Other Motors & Brake
  • Torque Motor

TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5"). Lathe Saw Cutting Milling Machine Cooling

  • TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5
  • TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5
  • TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5
  • TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5
  • TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5
  • TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5

TC-8130 1/8HP Machinery Coolant pump immersion 130mm (5"). Lathe Saw Cutting Milling Machine Cooling

TC-8130 Machinery Coolant Pump
immersion length 130mm (5").

The TC Series coolant pump is developed for spraying of cooling lubricants and the circulation system, especially for machine tools. It is suitable to driver liquids such as water, coolant, light oil and other clean, non-aggressive matters liquid to cooling or lubricant applications. TC Series can be used in all type machine tools to perform Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. operation (Lathing machine drilling machine, lapping machine, Milling machine, pressing machine, stamping machine, tapping machine, punch machine, cooling system, oil cooling, water circulation)
TC8130
Add to inquiry box
TC-8130 Machinery Coolant Pump
immersion length 130mm (5").

The TC Series coolant pump is developed for spraying of cooling lubricants and the circulation system, especially for machine tools. It is suitable to driver liquids such as water, coolant, light oil and other clean, non-aggressive matters liquid to cooling or lubricant applications. TC Series can be used in all type machine tools to perform Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. operation (Lathing machine drilling machine, lapping machine, Milling machine, pressing machine, stamping machine, tapping machine, punch machine, cooling system, oil cooling, water circulation)
  • Production information

     

    Product Specification

    • Brand: Yu Hseng
    • Model: TC-8130
    • Power: 94W (1/8 HP )
    • Phase & Voltage ( Low Volt / High Volt ): 1Φ & 100/200V, 110/220V, 115/230V, 120/240V; 3Φ & 220/440V, 220/380V, 208/415V,230/460V, 240/480V, 575V
    • Discharge Bore: NPT  3/8 ", NPT 1/2", PT(BSPT) 3/8", PT(BSPT) 1/2"
      (PT=BSPT=RC)
    • Immersion Length (flange to bottom): 130mm (5 ")
    • Most brands compatible ( Fuji AMT Graymills Yeong Chyung Flair Warlus etc.)     
    • Made in Taiwan
       
    • Flow rate in 60 Hz:
      1Φ, 3/8"  : 9.2   GPM (35 L/min )
      3Φ, 3/8"  : 9.8   GPM (37 L/min )
      1Φ, 1/2"  : 10.6 GPM (40 L/min )

      3Φ, 1/2"  : 11    GPM (42 L/min )
    • Lift (Head Height) in 60 Hz :
      1Φ, 3/8"  : 5.4 M
      3Φ, 3/8"  : 6.0 M
      1Φ, 1/2"  : 5.2 M
      3Φ, 1/2"  : 5.7 M
    • Pressure in 60 Hz :
      1Φ, 3/8"  : 7.7 PSI
      3Φ, 3/8"  : 8.5 PSI
      1Φ, 1/2"  : 7.4 PSI
      3Φ, 1/2"  : 8.1 PSI
     
    TC Serise Pump 360° VR
     
    TC-8180 RepresentativeTC-8180 Representative
     
     
    TC-4180 RepresentativeTC-4180 Representative
     
     
    Back to the top
    Design by MIRACLEWeb Design